Cabinets That Look Factory-Smooth
Spray-applied Sherwin-Williams ProClassic. No brush marks, no streaks. Most kitchens done in 3 days. From $2,500.
Get my free estimate → Call (512) 748-4787The Prep Is the Hard Part
Anyone can spray paint. The finish that lasts comes from the prep: every counter, appliance, and floor masked off, doors pulled and labeled, everything degreased and sanded before a drop of paint. That is where the work is.
A Hard, Factory-Smooth Finish
A roller leaves texture. We spray Sherwin-Williams ProClassic, so the finish is smooth, even, and built to take daily kitchen use. Here is what is included on every kitchen.
Degrease and mask
Counters, backsplash, appliances, and floors get plastic and blue tape. Cabinets are degreased so paint actually sticks.
Sand and prime
Light sand and a bonding primer so the finish grips, even on slick oak or an old factory coating.
Two sprayed coats
Two coats of Sherwin-Williams ProClassic, sprayed with cure time built in. No brush marks, no streaks.
Reassemble and warranty
Doors back on with new soft-close hinges if you want them, a walk-through, and a 2-year warranty.
From Estimate to Walk-Through
Four steps. Clear timeline. Most kitchens done in 3 days without tearing your home apart.
Free estimate
Julio counts doors and drawers, talks color and finish, and writes an itemized quote. No flat number sight unseen.
Degrease and prep
The kitchen is masked off, doors come off and get labeled, and everything is degreased and sanded.
Prime and spray
Bonding primer, then two sprayed coats of Sherwin-Williams ProClassic, with cure time between coats.
Reassemble and warranty
Doors go back on, we walk every door with you, fix anything you flag, and back it with a 2-year warranty.
Austin Homeowners on Our Work
"Julio and Eric provided outstanding service! They were extremely professional, efficient, and kept great communication the entire time. The work was completed quickly and with excellent quality."
"He takes his time to make sure everything is done properly and never cuts corners. You can tell he genuinely cares about the quality of his work, and it shows in the final results."
Cabinet Painting FAQ
How much does cabinet painting cost?
Most kitchen cabinet projects in Austin run $2,500 to $6,000, depending on the number of doors and drawers, the condition of the finish, and whether you want hardware updates. Julio counts the work in person and writes an itemized quote, so the number fits your kitchen.
How long does it take?
Most kitchens are done in 3 days. Day 1 is walk-through, mask, and prep with doors heading to the booth. Day 2 is sand, prime, and two sprayed coats of ProClassic. Day 3 doors go back on with a walk-through.
What paint do you use on cabinets?
Sherwin-Williams ProClassic, every time. It dries to a hard, factory-smooth finish that resists chips and stains, and it sprays with no brush marks and no streaks.
Do I have to move out?
No. We fully contain the work area with plastic and blue tape so your kitchen stays protected. You can stay in your home, we just ask you to keep counters clear during the spray phase. Call (512) 748-4787 with any questions.
Ready for a fresh kitchen?
Free, no-obligation estimate. Julio usually calls back within 2 hours.